Latest technical study service Tenders | Government technical study service Tenders

CTN :44969627

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of mechanical spares and works - 1" u clamp bolt, 1" union, 1"x6m jindal gi pipe, 1.5" barrel nipple, 1.5" brass ball valve, 1.5" gi elbow, 1.5" gi tee, 1.5" gi union, 1/4x12 pu connector, 100x75 allen key bolt, 10mm drill bit, 10x75 gi nut bolt washer, 16mm tap, 16x200 anchor fastener, 212 bearing, 220 gear oil, 25x5 ms flat, 2.5" gasket, 2.5mm ms plate/17 sheet, 2500x470x50 water drop tray, 300x25x5mm ms flat, 3mmx4ftx8ft ms plate, 4x8x5mm acrylic sheet, 5/8x6 ms nut bolt with washer, 5mmx5ftx8ft ms plate, 6 inch bench vice, 6mm hex lock nut with washer, 6x65 allen cap screw, 8x25 bolt, 8x75 bolt, allen m10x75mm hex central column, ambika o ring, appu cake 10 kg event, barrel hand pump, bearing bush, bearing pin, brass bush 1/2x1/4, cake 1 kg for event, clutch drive, cylinder transportation bangalore/ram sir, df oil, momento for events and visitors, dpt conveyor load head, dpt conveyor load head hook, dpt conveyor overhead load head, dpt conveyor u clamp head, dpt shed air compressor local box, festo cylinder 40/300, file 6 inch, gas cutting torch, gasket 48 central column, gd lower bell, gear and shaft 4 inch, gi elbow 1", gi elbow 1.5", gi elbow 1x1/2", gi long bend 1/2", gi nipple 1.5"x2", gi nipple 1.5"x4", gi pipe 1.5" jindal, gi reducer 1x1/2", gi reducer tee 1x1/2", gi reducing elbow 1x1/2", gi saddle cleat 1.5", gi sheet 4x8x1mm, gi socket 1", gi tee 1", gi tee 1.5", gi union 1", gi union 1.5", gm ball valve 1.5", gm float valve with ball 1 inch, gm nrv horizontal 25mm, gm nrv isi screwed 1.5", ht full threaded rod 1m, ht lock nut 16mm, ht nut m16, hydraulic 68 oil, hydraulic hex nipple, hydraulic hose 3/4"x1m, hydraulic hose pipe, hydraulic jack 25 ton, ice pick, joy l150 coupling, l95 coupling with bore, lerc cylinder courier charges bangalore, m seal, metal gasket, ms elbow 150 class, ms reducer 150 class, ms sch 40 b/w elbow 50mm, ms sch 40 reducer, ms socket forged 3/4", nilkamal pallet trolley, nut bolt 6x20, nut bolt 8x40, orange helmet karam, ovcm machine cylinder new, ovcm machine cylinder rod modification, ovcm shaft length work, pneumatic long head silencer 3/4", polish paper, ps paper, pu connector 1/2", pu connector 1/2"x12, pu connector 1/2x1/4, pu connector 1/4x8, pu connector 3/8x8, pu pipe 8mm, pump motor shaft straightning and impeller repair, quarter pin, rubber hydro testing seal, rubber sheet 5mm, rubber washer o packing, sealing unit hose pipe ss grade 2m, seamless pipe 50nb sch 40 js, skf bearing, skf bearing 32206, skf bearing 6012, skf bearing 6024, skf bearing 6026, skf bearing 6303 zz, skf bearing 6304 2z, soap, spider l95, ss ball 150mm od, ss ball valve 1/2" threaded, ss blind flange 6 inch, ss cfb ball valve 1.5", ss cfb ball valve 2", ss nipple 1.5"x6", ss nipple 2"x6", ss rod 8mm, ss sheet 4x8x1mm, ss sheet 4x8x3mm, ss water bottle, sumo o ring, t 8mm, tap handle, taparia 450mm adjustable pipe wrench, teflon trolley wheel 6 inch, tyre coupling, v seal 16/24/5, v seal 22/16/4, washing unit sprinkler, lpg conveyor chain (carbon steel), solenoid valve 1/2" 24v dc, ptfe thread sealant tape 12mm, pressure gauge 0-10 bar 63mm, temperature gauge bi-metal 0-120c, limit switch conveyor roller type, proximity sensor inductive 12mm, stud bolt m20x100 ss316, hex nut m20 ss316, copper crush washer 1" lpg rated, teflon bush 50mm od, nylon roller 100mm dia, torque wrench 1/2" dr 40-200 nm, chain block 2ton, old head guide rod supply, media converter, omron smps, wire rope sling 5t 2m, drill machine check nut, jk drill bit high speed, 4' polish wheel, 10x45 alenkey nut bolt 48 corsol, tube(pu) od4 (blue), tube(pu) od6 (blue), tube(pu) od8 (blue), 1 1/4 5/2 single ext. pilot valve, 1/4 5/2 double ext. pilot valve, or valve g1/4

CTN :44953244

12 May, 2026 6.86 Crore

Sriharikota - Andhra Pradesh

Tender For tender for work contract for lssf - work contract operations & maintenance activities of process & instrumentation systems (critical parameters monitoring, data logging, testing & analysis of chemicals) at location-1, 2, 3, 4 & 5 as per the specifications.(ptps) , work contract operations & maintenance works (assembly of valves/pt/tt/ls/hoses/srv/bd/ temporary joint leak checks) at location-1, 2, 3, 4 & 5 as per the specifications (ptp's), work contract facility up keeping activities like identification of materials/flow/components/valves/actuators/pressure gauges/ sensors/loading & un loading of any item at location - 1, 2, 3, 4 & 5, as per the specifications. (ptp's), work contract chemical neutralization treatment/process in batches as per the specifications (one batch:15 cu. m) , work contract hydro static testing of 30 cu.m mobile tanks as per specifications,, work contract hydro static testing of 60 cu.m storage tanks as per the specifications. ,work contract tubing work for process instruments, tube od size: 6mm to 12mm, work contract servicing & testing of manual/ep/globe valve, size: up to 50nb, work contract servicing & testing of manual/ep/globe valve, size: 65 nb to 100nb, work contract servicing & testing of manual/ep/globe valve, size: 150 nb to 200nb

State Government

CTN :43910005

04 May, 2026 NA

Kutch - Gujarat

Tender For corrigendum : work of outsourcing statutory work of testing, examination, inspection and certification of lifts, lifting machines and lifting tackles & pressure vessels at gsecl, kltps

State Government

CTN :44962070

07 May, 2026 4.11 Lacs

Multi City - Karnataka

Tender For following works shall be carried out quarterly during the contract period for the two identical sets of co2 flooding system at mghe power house. the one set of system for carting to the units-1,2,3&4 and the second set of system for carting to units-5,6,7&8. i)cleaning of heat detector externaly with dry cloth ii)ensure working condition of heat detectors iii)cleaning of smoke detector externaly with dry cloth iv)ensure working condition of smoke detectors v)simulate heat and smoke detector simultaneously and check for cross zone vi)checking for leakage in pilot cylinder vii)checking the weight of co2 pilot cylindersviii)check the condition of co2 pilot hose ix)check the condition of co2 discharge hose x)inspect pressure switch and check for its functioning xi)inspect maual call points and check for its functioning xii)inspect abort switch and check for its functioning xiii)inspection of online weigh monitor and check for its functioning xiv)inspect hooter with strobe and check for its functioning xv)checking for healthiness of the battery xvi)checking the condition for slave nrv xviichecking the condition for master nrv xviii)checking of solenoids. xix)refilling of co2 cylinder and pressure testing 45 kg capacity and 4.5kg capacity (in case release of co2 gas during generator fire incidents) xx)any other work connected with the system not explicitly mentioned shall also be carried out for safe and proper operation of the system. xxi)conducting the demo of operation of the co2 flooding system twice (once in 2 quarter) during the annual maintenance contract period for kpcl staff.

CTN :44959001

01 May, 2026 86.8 Thousand

Darjeeling - West Bengal

Tender For repair to vehicle - dismantaling and opening of stering assembly repairing and replacing the following necessary spare parts fitting and testing including supply of the following parts , assy.kit-suspension rubber parts , assy tie rod , centre link assy 113 08 364 0c , bush , ball joint assy-upper wb , assy ball joint lower , taper roller brg 30205 , taper roller brg lm48548 , assy pipe union bolt , wheel cylinder assy , thrust washer-idler arm , split pin 6.3 x 6.3 , cotton piece , oil seal , grease pack , assy top wishbone , gasket fip to support , sealing washer 8 x12 is 3175 cu , fuel paper element , dismantaling and opening of gear box clutch plate brake system , repairing and replacing the following necessary spare parts fitting and testing supply of the following parts , assy accelerator cable hand brake , brake oil , front brake pad , rear brake lining , master cylinder kit , assy 10 inch vacuum booster , kit brake lining non-asb af2873 , nut , castrol extra long life gear oil 80 w 90 , nyloc nut m14 , washer , split pin 3.2x22 , gasket , clutch plate , pressure plate , release bearing , flywheel , taking out old unsv lub oil filter , fuel filter , air filter and draining of engine oil complete inclding refitting and supply of the following items , lub oil filter , fuel filter element primary , fuel filter element secondary , air filter element , engine oil 20w 40 make -castrol gtx , taking out old unsv external body light , fog light complete including refitting and supply of the following items , wind shield , tail light set , fog light , wiper , washer fluid tank , side mirror orvm , cleaning , washing and polishing of above mention vehicle as per standard norms , testing of vehicle on road after completion of work for smooth running upto entire satisfaction of age e m bagdogra

CTN :44959009

01 May, 2026 90.7 Thousand

Darjeeling - West Bengal

Tender For repair to vehicle ba no 16b 120675k : - repair to vehicle ba no 16b 120675k : -taking out old unsv lub oil filter , fuel filter , air filter and draining of engine oil complete inclding refitting and supply of the following items , lub oil filter , air filter element , engine oil 20w 40 make castrol gtx , dismantaling and opening of gear box , clutch plate & brake system , repairing and replacing the following necessary spare parts fitting and testing supply of the following parts , assy accelerator cable , brake oil , front brake pad , rear brake lining , master cylinder kit , nut , castrol extra long life gear oil 80 w 90 , nyloc nut m14 , washer , gasket , clutch plate , pressure plate , release bearing , gear lever bearing , opening of 4 wheel and greasing to nipple , checking of alignment , replacement of 4 nos bearing 2 set front two set rear complete all as specified and as directed. , ball joint upper , ball joint lower , tie rod end lh rh , drag link kit , suspension bush , front spring pad , idler arm bush kit , balance rod bush , balance shaft bush , rear spring pad bush , shackle pin , shoker bush kit , suspension arm bush , opening of 4 wheel and greasing to nipple , checking of alignment , replacement of 4 nos bearing 2 set front two set rear complete all as specified and as directed. , opening of 4 wheel and replacement of brake pads complete all as specified and as directed. refixing of wheel and testing , dismantaling and repair of bonnet for water leakage , refittings after repair and testing , welding of back stand , denting and painting after preparation of above mention , door straper , steering horn pad , curtain , mudguard , wheel cover , fog light , wiper , water spray jet kit , fire extinguisher , cleaning , washing and polishing of above mention vehicle as per standard norms , testing of vehicle on road after completion of work for smooth running upto entire satisfaction of age e/m bagdogra

State Government

CTN :44447895

29 Apr, 2026 8.01 Lacs

Multi City - Chhattisgarh

Tender For corrigendum : work contract for hydraulic testing, examination, and certification of pressure vessels installed at 2x500 mw, abvtps, cspgcl, janjgir-champa.

State Government

CTN :44619208

21 Apr, 2026 5.23 Crore

Multi City - Karnataka

Tender For corrigendum : survey investigation design supply installation testing and commissioning of tank filling scheme head works consisting of construction of intake well with connecting pipe jack well cum pump house vertical turbine pumps coupled to motors pump house elec works necessaty valves delivery pipe manifold system electrical panel soft starter capacitors 11kv transformer 11 or 0.433 kv substation kv power line and 11kv terminal bay rising main pressure distribution for filling up of 5 nos of mi or zp tanks by lifting water from bhadra river near donabaghatta village of bhadravathi taluk including operation and maintainance for a period of 5 years after successful completion of work for donabaghatta tank filling scheme on turn key basis

State Government

CTN :44869911

13 Apr, 2026 14.62 Lacs

Multi City - Telangana

Tender For tggenco-ytps (5x800 mw)-bop-ii-testing, calibration, cleaning and servicing of candi instruments such as motor operated valves, solenoid operated valves, pressure tranmitters, level transmitters, turbidity sensors, rtds, vibration sensors and flow transmitters, hmi, ows, lvs, ews, back-up servers, plc panels of pt plant, dcs panels of raw water pump house, battery maintenance and ups panels etc. in both pt plant and raw water pump house/ stage-i of yadadri thermal power station, veerlapalem for the period of 01.04.2026 to 31.03.2027 or from date of commencement of work to 31.03.2027 for f.y 2026-2027

CTN :44854365

22 Apr, 2026 5.45 Lacs

Ibrahimpatnam - Andhra Pradesh

Tender For retubing of fans lub oil coolers, scoop oil coolers, cleaning of scoop oil coolers, replacement of damaged igv links for pa fans, servicing & pressure testing of fluid coupling coolers, servicing of lub oil pumps of units i&ii for a period of 6 months from the date of commencement of work as and when required during the year 2026-27.

Technical Study Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government